Possible causes
– Faulty Mass Air Flow Sensor
– Air leak before or after sensor
– Mass Air Flow Sensor harness is open or shorted
– Mass Air Flow Sensor circuit poor electrical connection
– Air leak before or after sensor
– Mass Air Flow Sensor harness is open or shorted
– Mass Air Flow Sensor circuit poor electrical connection
When is the code detected?
The Engine Control Module (ECM) detected a Mass Air Flow (MAF) sensor signal below calibrated limit
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P1102 FORD Description
The Mass Air Flow (MAF sensor circuit is monitored by the Powertrain Control Module (PCM) for an out of range air flow (or voltage) input. If during key ON engine OFF the air flow voltage signal is greater than 0.27 volts the test fails. Likewise, if during key ON engine running, an air flow voltage signal is not within 0.46 volt to 2.44 volts, the test fails.