Possible causes

– Clutch Pressure Control Solenoid Valve harness is open or shorted
– Clutch Pressure Control Solenoid Valve circuit poor electrical connection
– Faulty Clutch Pressure Control Solenoid Valve

Tech notes

The Clutch Pressure Control Solenoid Valve is located inside the transmission.

Symptoms

– Engine Light ON (or Service Engine Soon Warning Light)

P1768 HONDA Description

The A/T clutch pressure control solenoid valve is used for shift control and lock-up control. A spool in the A/T clutch pressure control solenoid valve pushes a valve according to the duty cycle that is controlled by the powertrain control module (PCM) to pressurize fluid so the hydraulic pressure is proportional to the current. The PCM measures the current flowing through the A/T clutch pressure control solenoid valve and uses feedback control to compensate the difference between the actual current and the commanded one. If the measured current for the PCM output dutyn cycle is not within a specified range (open or short to ground), a malfunction is detected and a DTC is stored.

HONDA Technical Service Bulletins for P1768 code